XP-3 Control Processor

When the XP-3 is incorporated into an RTI control solution, the result is nothing short of exceptional. Boasting a powerful 533MHz CPU and 128MB of non-volatile flash memory, the processor packs a big punch and easy expansion capabilities. With a built-in RF transceiver and support for wireless bi-directional communications utilizing robust ZigBee® technology, the XP-3 can provide the user with real-time feedback from supported third-party devices such as music servers, lighting, security, and much more. Now, important data from these devices is available to the user with a simple touch from current song information to the status of a security systemeven the weather forecast! The XP-3 is loaded with features normally reserved for higher-priced processors, such as a built-in astronomical clock and control via Ethernet, RS-232, and relays. The XP-3 is the ultimate choice for powerful bi-directional control and automation at a moderate price!

* Integration Designer is only available to authorized RTI dealers.


XP-3 Features

2-Way 
Convenient and reliable control with status feedback from controlled devices such as on/off or arm/disarm status, dimming value of lights, playlists, available stations.

RS-232 
One (1) control port for 3-wire connection with the capability of polling status feedback from controlled devices or systems.

Relay
Two (2) built-in low voltage dry contacts that provide contact closure or switching control for loads up to 5A/30VDC (external power supply required).

MPIO
One (1) Multi-Purpose Input/Output control port that allows for infrared control and connecting voltage sensors or RS-232 communication modules.

Infrared
Two (2) control ports for 2-wire connection to infrared emitters, blasters and repeaters.

Sense Input
Two (2) inputs that sense the voltage state from a voltage sensor to trigger a programmed control command or macro.

Ethernet
Standard 10/100 BaseT network connection for bidirectional control communication with RTI remotes, touch panels and devices that are controlled over IP network.

Zigbee
Standard wireless Zigbee IEEE802.15.4 connection for bidirectional control communication with RTI remotes.

Astronomical Clock
Built-in clock that syncs through an internet connection allows to schedule time-based events to automate all aspects of the installed environment, including climate, lighting, music, and much more.

  • Supports RTiPanel App for Apple/Android Smart Phones and Tablets and Windows PCs.
  • Supports same two-way drivers used by XP6/XP8.
  • Powerful 32bit, 533MHz CPU.
  • 128Mb of non-volatile Flash memory stores your system configuration
    even when power is not present.
  • One multi-purpose I/O port supports optional RTI power sensing and
    communications modules.
  • Two IR output ports with variable output.
  • Two assignable voltage sense inputs.
  • Two programmable relay outputs.
  • One two-way RS-232 port for bi-directional communication with
    supported devices.
  • Integrated 10/100Base-T Ethernet port for programming, control and
    two-way communication with compatible devices.
  • Integrated 10/100Base-T Ethernet port supports Power-over-Ethernet
    (POE) Class 3.
  • Built-in astronomical clock for time-based events and sleep timers.
  • Built-in 2.4GHz ZigBee® RF transceiver module and removable
    antenna.
  • Compatible with industry standard IR emitters and blasters.
  • Configurable for communication with RTI in-wall products and
    433MHz wireless controllers.*
  • Programmed using the RTI Integration Designer Software.
  • USB 2.0 and Ethernet programming.
  • Field upgradable firmware.

    *NOTE: Using a 433MHz RTI remote control requires a separate RM-433
    Antenna. Also, while this configuration is possible, it’s use should be
    limited to secondary zones that aren’t heavily used (guest rooms, outdoor
    areas etc). Installations requiring primary control via both Zigbee and
    433MHz controllers should use an XP-6 or XP-8 control processor.

* Integration Designer software only available to authorized RTI dealers.

Power +12VDC, 1A
Wireless Networking IEEE802.15.4 Zigbee network compliant
RF Frequency Range 2.4GHz - 2.5GHz
Multi-Purpose Output Ports One custom 3.5mm 4-conductor jack (port 1)
Designed for RTI modules as well as industry-standard IR emitters
IR Output Ports Two, 3.5mm jack (ports 2 & 3)
Compatible with industry-standard IR emitters
IR Output Drive 100mA maximum (per port, adjustable)
Infrared Frequency Range 15 KHz - 460 KHz
Infrared Input Compatible with industry-standard repeaters and receivers
Relays Two, 5 amps @ 30VDC
Sense Inputs Two, 3-24VDC
RS232 Ports One, Bi-directional RJ45 Connections
Ethernet Port One, 10/100Base-T with PoE (Class 3)
USB Ports One, Programming
RAM Memory 64MB
Flash Memory 128MB
Mounting Wall-mount or free standing
Operating Temperature +32°F to +122°F (0°C to +50°C)
Operating Humidity 5% to 95% Non-condensing
Dimensions (W x H x D) 7.0 in (175mm) x 3.0 in (76mm) x 1.0 in (25mm)
Weight .4lbs (212g)
Warranty Three Years (Parts & Labor)