RP-6 Control Processor

This model has been discontinued

RTI's RP-6 Remote Control Processor is an advanced control system for RTI's family of universal remote controls. Unlike simple IR-to-RF converters, the RP-6 stores all of the system's commands where they should be - within a central controller at the equipment rack.

The RP-6 receives trigger codes from RTI remote controls using external IR or RF receivers. Multiple receivers can be used together for greater coverage allowing you to discover a new freedom - reliable control of the entertainment system from just about anywhere.

The RP-6 Remote Control Processor provides advanced control and automation of any size home theater system. The RP-6 packs big time power in one small package - providing an IR router, triggered relay outputs, an IR connecting block and IR pass-through. You can even connect optional RS-232 interface cables for greater control, and power sensing modules to insure that your system's operation is always predictable and reliable.

NOTE: A 433MHz antenna and remote control must be used with this model of control processor. It is not compatible with the 2.4 GHz Zigbee® enabled products.

  • Six multi-purpose I/O ports
  • Three programmable relay outputs
  • IR input for IR pass-through or control
  • Input for connection of multiple RF Receiver modules
  • RS-485 communications jack for future expansion
  • I/O ports are compatible with industry standard IR emitters and repeater systems
  • All output ports incorporate both short-circuit and overload protection
  • Variable IR output power on all ports
  • I/O ports support optional RTI Power Sensing and Communication modules
  • Programmed using the Integration Designer software*
  • Non-volatile Flash memory stores your system configuration even when power is not present
  • Field upgradeable firmware (thru the Integration Designer Software)
  • USB programming

*Integration Designer software only available to authorized RTI dealers.

Power Supply +12V DC, 1.25A
Number of Output Ports Six
Output Ports Custom 3.5mm 4-conductor jacks are designed for RTI modules as well as industry-standard IR emitters.
IR Output Drive 100mA maximum (per port, adjustable)
200mA maximum (high IR output port)
Infrared Frequency Transmission Range 15kHz - 460kHz
Infrared Input Compatible with industry-standard repeaters and receiving systems
Relays 3 Amps @ 30 VDC
Mounting Wall-mount or free standing
Dimensions (W x H x D) 9.3" (236mm) x 5.3" (135mm) x 1.5" (38mm)
Weight 1 lb. 3 oz. (543g)
Warranty Three Year (Parts & Labor)

* All specifications subject to change without notice.