KX2 2.8 inch In-Wall Touchpanel Keypad

Quick Overview

The KX2 in-wall controller has a clean, sleek design with twelve programmable hard buttons and a 2.8" color touchscreen. The hard buttons and graphic interface are fully programmable using RTI's Integration Designer® software for full control of electronics throughout the building. A built-in infrared output port allows direct control or get two-way control when used with an RTI XP series control processor. In addition, the unit's integrated 10/100Base-T Ethernet port with Power-over-Ethernet (POE) provides the flexibility to accommodate any installation.


*Feedback requires a compatible two-way RTI control processor.
*Integration Designer software only available to authorized RTI dealers.

  • Fully programmable 2.8" touchscreen display and twelve hard buttons.
  • QVGA resolution (240w x 320h) TFT LCD to display custom buttons, text and graphics.
  • Integrated 10/100Base-T Ethernet port with Power-over-Ethernet.
  • IR output drives up to 1000 feet of wire.
  • Proximity sensor automatically wakes the unit up when approached by the user and an ambient light sensor adjusts the brightness.
  • Integrated mounting wings for easy installation in retrofit installs.
  • Fits in a 4"x4" square electrical junction box (See installation guide for important information).**
  • Ships with stylish, low-profile white bezel - bezels also available in black and light almond.
  • Faceplate and buttons are black with a glossy finish.
  • Twelve hard buttons may be interchanged and custom laser engraved using Laser Shark.
  • Optional modules/processors for voltage sensing, relays and advanced two-way control.
  • USB and Ethernet programming.
Power+9VDC to +16VDC, 1A max
Power ManagementAdjustable backlight brightness, Ambient light sensor, Proximity sensor
Touchscreen DisplayHigh-brightness color TFT LCD
QVGA (240w x 320h pixels) with 65K colors
Integrated high-resolution resistive touchscreen
Display Size2.8" (71mm) diagonal
Display BacklightLED Backlit, 200nit
Infrared OutputThrough control port, 200mA output
Drives up to 1000 ft (300 m) of wire
Ethernet Port10/100 Base-T with Power-over-Ethernet
AudioBeeper
Total System Memory32MBytes Flash (non-volatile) memory
Device CapabilityTotal number of devices is limited only by memory
Macro CapabilityUnlimited steps in a single macro
Total number of macros is limited only by memory
Macro capability on every button
CommunicationsUSB programming port
EnclosureHigh-impact molded ABS plastic
MountingIntegrated mounting wings, or screws through front bezel
Front Plate Dimensions (H x W)4.4 in (112mm) x 4.6 in (117mm)
Installation Cut-Out (H x W)3.789” in (96.5mm) x 3.789” in (96.5mm)
Total Depth in Wall1.2 in (31mm) Plus cables
Operating Temperature+32°F to +122°F (0°C to +50°C)
Operating Humidity5% to 95% Non-condensing
Weight7.5 oz (212g)
WarrantyThree Years (Parts & Labor)

* All Specifications subject to change without notice.
** The KX2 uses a standard 4”x 4” electrical junction box. These should be available at most hardware stores or electrical supply stores online (ex. Granger.com).

IMPORTANT NOTES:
The KX2 uses a standard 4”x 4” electrical junction box. These should be available at most hardware stores or electrical supply stores online (ex. Grainger.com).

  • A dual gang outlet box will NOT work.
  • The KX2 has .38” thick corner tabs, making the KX2 protrude .38” from the front edge of the junction box. Therefore, the electrical box should be mounted flush with the wall stud. Typically wall sheeting materials like drywall are ½” or thicker, allowing the KX2 to be flush with the wall sheeting. If the wall sheeting is thinner than .38”, the junction box will need to be mounted set back.
  • Use #8 – 32 flat head screws.
  • Box should be 1.5” minimum depth.
Back to Product List
KX2 2.8" In-Wall Touch Panel Keypad White Border

More Views

  • KX2 2.8" In-Wall Touch Panel Keypad White Border
  • KX2 2.8" In-Wall Touch Panel Keypad Black Border
  • KX2 2.8" In-Wall Touch Panel Keypad Silver Border

Awards

  • award
  • award

Showcase Installation

Additional Information

Model KX2
Release Date No