VWS-21R Wallplate HDBaseT Video Receiver
The VWS-21R is a Decora style HDBaseT receiver that receives an HDMI video signal over Cat5e/6 from a VWS-21T transmitter or any HDBaseT compatible transmitter. The VWS-21R can be powered through the Cat5e/6 cable using PoH (Power over HDBaseT). It also receives an IR or RS-232 control signal through the same Cat cable and delivers it to the connected display or projector.
- Support for high resolution video at 4K, and 1080p 3D.
- HDCP 1.4 Compliant, supporting HDMI 1.4.
- Utilizes HDBaseT technology for HDMI video, IR, RS-232 control and power over Cat5e/6 cable.
- Extends HDMI video at 1080p resolution up to 229ft (70m) and 4Kx2K up to 131ft (40m).
- One RS232 port for bidiretional control of remote devices.
- One infrared input and output for 2-way IR transmission over HDBaseT
|Power Supply (not included)||12VDC 2A or via Power over HDBaseT (PoH)|
|Mounting||2-Gang Wall Box|
|Video/Audio/Control Input||One HDBAseT (PoH) (RJ45)|
|Video Output||One HDMI|
|Resolution Range HDMI||4K, 1080p 3D, 1080P, 1080i,
720P, 576P, 576i, 480P, 480i
|Resolution Range DVI||1920x1200@60Hz, 1920x1080@60Hz,
|Control Signal Input||One, RS-232, 3-pin Phoenix Connector
One, IR, 3-pin Phoenix Connector
One, IR Sensor
|Control Signal Output||One, RS-232, 3-pin Phoenix Connector
One, IR, 2-pin Phoenix Connector
|HDBaseT Transmission Distance||1080P ≤ 229ft (70m)
4K ≤ 131ft (40m)
|EDID Management||Built-in EDID data and manual EDID management|
|Compliance||HDMI 1.4, HDCP 1.4|
|Operating Temperature||0 to +40°C / +32 to +104°F|
|Operating Humidity||5% to 95% Non-condensing|
|Dimensions WxHxD||4.09in(104mm) x 3.50in(89mm) x 1.73in(44mm)|
|Weight||0.52 lbs (240g)|
|Warranty||Three Years (Parts & Labor)|
All features and specifications subject to change without notice.