-->

Lutron RadioRA 2/HomeWorks QS

In stock
SKU

SURFIR COMPANION REMOTE CONTROL

lutron-radiora2/homeworks-qs
  • Provides a companion remote for use with the RTiPanel and Virtual Panel apps.
  • Tracks page changes to stay in sync with one or more apps.
  • Dual RF transmission capability uses 433MHz and 2.4GHz (utilizing Zigbee® technology).
  • Remote finder beeper allows user to easily locate SURFiR by pressing a button on their smart phone or tablet.
  • Ergonomic design permits effortless, one-handed operation.
  • Completely customizable and programmable.
  • Security screw on battery door for hotel applications.
  • Inexpensive and requires no direct programming.*
  • Includes eight buttons that can be custom labeled.
  • Select between 433MHz and 2.4GHz RF operation.
  • Works with any XP series control processor.
  • Battery low indicator.
  • Uses 4 AAA batteries.

* There is no USB port on the SURFiR. Programming is done in Integration Designer which generates a "code key" that is input on remote keypad.

Power 4 AAA Alkaline batteries
Power Management Automatic On/Off
Radio Frequency Control Range Up to 100 feet (30.5 meters)
(with optional System Interfaces/Processors)
Radio Frequency Carrier 433 MHz & 802.15.4 @ 2.4Ghz (Zigbee® technology)
Operating Temperature +32°F to +122°F (0°C to +50°C)
Operating Humidity 5% to 95% Non-condensing
Standby Time on Full Charge 365 Days
Total System Memory 256K Bytes Flash (non-volatile) memory
Device Capability Total number of devices determined in control app (ex. RTiPanel)
Macro Capability All programming stored in RTI XP control processor
Macro capability on every button
Dimensions (L x W x D) 9.5 in (240mm) x 1.8 in (46mm) x .8 in (22mm)
Enclosure High-impact molded ABS plastic
Weight 8.0 oz. (228g) with batteries
Warranty Three Years (Parts & Labor)
One year on the battery
Back to Product List
$0.00

SURFIR COMPANION REMOTE CONTROL

This driver is for Lutron RadioRA 2 and HomeWorks QS systems connected via Ethernet or RS232.  Version 2.1 is a rework of the Lite/Full versions of the driver which now supports instrumentation for XP Diagnostics, Dynamic Renaming and Reconfiguration, and other various improvements.  Version 2.14 is an accumulation of fixes and adjustments aimed towards resolving connectivity issues with HomeworksQS version 5.1.0 beta and allowing the driver to be used with QS Standalone via IP or RS232 Control. Version 2.14 also adds the ability to call scenes directly for QS Standalone/Grafik Eye QS systems.  Version 2.15 fixes issue with RA2 firmware version 7.5 where dimmer and level devices wouldn't update feedback properly.  Versions 2.16-2.18 include various fixes and adds button release events for keypad buttons 1-15.  Version 2.19 fixes Visor input event execution for press and release events and adds All Off and All On descriptions to Top Raise/Lower events for Table-Top seeTouch Keypads.  Version 2.2 adds pushed/released events for ID 1 buttons 1-100, optimized XPDiagnostics print routines, moved general Lutron error responses to XPDiagnostics High log level, recoded connectivity and initialization routines, and adjustments to Button Event naming to reflect more accurate Pico information.  Version 2.21 fixes connectivity issue while using serial control with RA2. Versions 2.22-2.24 added undocumented monitoring command suppression, adjustments for monitoring routines, and improved filtering for unwanted responses. 


Lite and Full versions of the driver are now obsolete and are discontinued.  The update driver feature will work for any previous version of the Lutron HomeWorksQS.rtidriver including the Lite and Full versions.

IMPORTANT NOTE: This driver should be used with new RadioRA2, HomeWorks QS, or QS Standalone installations.  The XP firmware must be current for the driver to operate and will only load in Integration Designer 9.0 or greater.  The Update Driver feature will NOT work with RTI systems currently using the old RadioRA2 driver (version 1.2), which is now discontinued, or systems still using old firmware.

VIDEO: Programming using the Lutron Homeworks/QS Driver

  • Provides a companion remote for use with the RTiPanel and Virtual Panel apps.
  • Tracks page changes to stay in sync with one or more apps.
  • Dual RF transmission capability uses 433MHz and 2.4GHz (utilizing Zigbee® technology).
  • Remote finder beeper allows user to easily locate SURFiR by pressing a button on their smart phone or tablet.
  • Ergonomic design permits effortless, one-handed operation.
  • Completely customizable and programmable.
  • Security screw on battery door for hotel applications.
  • Inexpensive and requires no direct programming.*
  • Includes eight buttons that can be custom labeled.
  • Select between 433MHz and 2.4GHz RF operation.
  • Works with any XP series control processor.
  • Battery low indicator.
  • Uses 4 AAA batteries.

* There is no USB port on the SURFiR. Programming is done in Integration Designer which generates a "code key" that is input on remote keypad.

Power 4 AAA Alkaline batteries
Power Management Automatic On/Off
Radio Frequency Control Range Up to 100 feet (30.5 meters)
(with optional System Interfaces/Processors)
Radio Frequency Carrier 433 MHz & 802.15.4 @ 2.4Ghz (Zigbee® technology)
Operating Temperature +32°F to +122°F (0°C to +50°C)
Operating Humidity 5% to 95% Non-condensing
Standby Time on Full Charge 365 Days
Total System Memory 256K Bytes Flash (non-volatile) memory
Device Capability Total number of devices determined in control app (ex. RTiPanel)
Macro Capability All programming stored in RTI XP control processor
Macro capability on every button
Dimensions (L x W x D) 9.5 in (240mm) x 1.8 in (46mm) x .8 in (22mm)
Enclosure High-impact molded ABS plastic
Weight 8.0 oz. (228g) with batteries
Warranty Three Years (Parts & Labor)
One year on the battery
Back to Product List
Installation FIles
$0.00
  • Provides a companion remote for use with the RTiPanel and Virtual Panel apps.
  • Tracks page changes to stay in sync with one or more apps.
  • Dual RF transmission capability uses 433MHz and 2.4GHz (utilizing Zigbee® technology).
  • Remote finder beeper allows user to easily locate SURFiR by pressing a button on their smart phone or tablet.
  • Ergonomic design permits effortless, one-handed operation.
  • Completely customizable and programmable.
  • Security screw on battery door for hotel applications.
  • Inexpensive and requires no direct programming.*
  • Includes eight buttons that can be custom labeled.
  • Select between 433MHz and 2.4GHz RF operation.
  • Works with any XP series control processor.
  • Battery low indicator.
  • Uses 4 AAA batteries.

* There is no USB port on the SURFiR. Programming is done in Integration Designer which generates a "code key" that is input on remote keypad.

Power 4 AAA Alkaline batteries
Power Management Automatic On/Off
Radio Frequency Control Range Up to 100 feet (30.5 meters)
(with optional System Interfaces/Processors)
Radio Frequency Carrier 433 MHz & 802.15.4 @ 2.4Ghz (Zigbee® technology)
Operating Temperature +32°F to +122°F (0°C to +50°C)
Operating Humidity 5% to 95% Non-condensing
Standby Time on Full Charge 365 Days
Total System Memory 256K Bytes Flash (non-volatile) memory
Device Capability Total number of devices determined in control app (ex. RTiPanel)
Macro Capability All programming stored in RTI XP control processor
Macro capability on every button
Dimensions (L x W x D) 9.5 in (240mm) x 1.8 in (46mm) x .8 in (22mm)
Enclosure High-impact molded ABS plastic
Weight 8.0 oz. (228g) with batteries
Warranty Three Years (Parts & Labor)
One year on the battery
Back to Product List
More Information
Category Lighting Control
Manufacturer Lutron
Model RadioRA 2/HomeWorks QS
Driver Version 2.24
Release Date Sep 11, 2018
Type your content here.