-->

IR Emitter Connecting Block

In stock
SKU

SURFIR COMPANION REMOTE CONTROL

ECB-5 IR Emitter Connecting Block
  • Provides a companion remote for use with the RTiPanel and Virtual Panel apps.
  • Tracks page changes to stay in sync with one or more apps.
  • Dual RF transmission capability uses 433MHz and 2.4GHz (utilizing Zigbee® technology).
  • Remote finder beeper allows user to easily locate SURFiR by pressing a button on their smart phone or tablet.
  • Ergonomic design permits effortless, one-handed operation.
  • Completely customizable and programmable.
  • Security screw on battery door for hotel applications.
  • Inexpensive and requires no direct programming.*
  • Includes eight buttons that can be custom labeled.
  • Select between 433MHz and 2.4GHz RF operation.
  • Works with any XP series control processor.
  • Battery low indicator.
  • Uses 4 AAA batteries.

* There is no USB port on the SURFiR. Programming is done in Integration Designer which generates a "code key" that is input on remote keypad.

Power 4 AAA Alkaline batteries
Power Management Automatic On/Off
Radio Frequency Control Range Up to 100 feet (30.5 meters)
(with optional System Interfaces/Processors)
Radio Frequency Carrier 433 MHz & 802.15.4 @ 2.4Ghz (Zigbee® technology)
Operating Temperature +32°F to +122°F (0°C to +50°C)
Operating Humidity 5% to 95% Non-condensing
Standby Time on Full Charge 365 Days
Total System Memory 256K Bytes Flash (non-volatile) memory
Device Capability Total number of devices determined in control app (ex. RTiPanel)
Macro Capability All programming stored in RTI XP control processor
Macro capability on every button
Dimensions (L x W x D) 9.5 in (240mm) x 1.8 in (46mm) x .8 in (22mm)
Enclosure High-impact molded ABS plastic
Weight 8.0 oz. (228g) with batteries
Warranty Three Years (Parts & Labor)
One year on the battery
Back to Product List
$0.00

SURFIR COMPANION REMOTE CONTROL

The ECB-5 IR Emitter Connecting Block provides expanded infrared signal distribution when used with RTI control processors, in-wall touchpanels, device connecting blocks (CB4/CB8), third party infrared repeater systems, etc. It has one infrared signal input and five emitter output ports that allow the connection of up to five single or dual infrared emitters. It also incorporates a sense input for monitoring the power status of a switched outlet, current sensor, light sensor, etc.

  • Provides a companion remote for use with the RTiPanel and Virtual Panel apps.
  • Tracks page changes to stay in sync with one or more apps.
  • Dual RF transmission capability uses 433MHz and 2.4GHz (utilizing Zigbee® technology).
  • Remote finder beeper allows user to easily locate SURFiR by pressing a button on their smart phone or tablet.
  • Ergonomic design permits effortless, one-handed operation.
  • Completely customizable and programmable.
  • Security screw on battery door for hotel applications.
  • Inexpensive and requires no direct programming.*
  • Includes eight buttons that can be custom labeled.
  • Select between 433MHz and 2.4GHz RF operation.
  • Works with any XP series control processor.
  • Battery low indicator.
  • Uses 4 AAA batteries.

* There is no USB port on the SURFiR. Programming is done in Integration Designer which generates a "code key" that is input on remote keypad.

Power 4 AAA Alkaline batteries
Power Management Automatic On/Off
Radio Frequency Control Range Up to 100 feet (30.5 meters)
(with optional System Interfaces/Processors)
Radio Frequency Carrier 433 MHz & 802.15.4 @ 2.4Ghz (Zigbee® technology)
Operating Temperature +32°F to +122°F (0°C to +50°C)
Operating Humidity 5% to 95% Non-condensing
Standby Time on Full Charge 365 Days
Total System Memory 256K Bytes Flash (non-volatile) memory
Device Capability Total number of devices determined in control app (ex. RTiPanel)
Macro Capability All programming stored in RTI XP control processor
Macro capability on every button
Dimensions (L x W x D) 9.5 in (240mm) x 1.8 in (46mm) x .8 in (22mm)
Enclosure High-impact molded ABS plastic
Weight 8.0 oz. (228g) with batteries
Warranty Three Years (Parts & Labor)
One year on the battery
Back to Product List
  • Provides a companion remote for use with the RTiPanel and Virtual Panel apps.
  • Tracks page changes to stay in sync with one or more apps.
  • Dual RF transmission capability uses 433MHz and 2.4GHz (utilizing Zigbee® technology).
  • Remote finder beeper allows user to easily locate SURFiR by pressing a button on their smart phone or tablet.
  • Ergonomic design permits effortless, one-handed operation.
  • Completely customizable and programmable.
  • Security screw on battery door for hotel applications.
  • Inexpensive and requires no direct programming.*
  • Includes eight buttons that can be custom labeled.
  • Select between 433MHz and 2.4GHz RF operation.
  • Works with any XP series control processor.
  • Battery low indicator.
  • Uses 4 AAA batteries.

* There is no USB port on the SURFiR. Programming is done in Integration Designer which generates a "code key" that is input on remote keypad.

Power 4 AAA Alkaline batteries
Power Management Automatic On/Off
Radio Frequency Control Range Up to 100 feet (30.5 meters)
(with optional System Interfaces/Processors)
Radio Frequency Carrier 433 MHz & 802.15.4 @ 2.4Ghz (Zigbee® technology)
Operating Temperature +32°F to +122°F (0°C to +50°C)
Operating Humidity 5% to 95% Non-condensing
Standby Time on Full Charge 365 Days
Total System Memory 256K Bytes Flash (non-volatile) memory
Device Capability Total number of devices determined in control app (ex. RTiPanel)
Macro Capability All programming stored in RTI XP control processor
Macro capability on every button
Dimensions (L x W x D) 9.5 in (240mm) x 1.8 in (46mm) x .8 in (22mm)
Enclosure High-impact molded ABS plastic
Weight 8.0 oz. (228g) with batteries
Warranty Three Years (Parts & Labor)
One year on the battery
Back to Product List
More Information
Model ECB-5
Release Date No
Type your content here.