The ESC-2 Ethernet to Serial Converter provides a
convenient way to add two
RS-232 ports to an RTI XP series control processor. Wire the ESC-2 to the local Ethernet network with standard cat-5 cable and it will offer full two-way control, as if the device was wired directly to the control processor. Two built-in RJ-45 jacks and the included RJ-45 to DB9 adapters allow efficient cat5 cabling between the ESC-2 and the device being controlled.* This allows full RS-232 control virtually anywhere there is access to an Ethernet network connection.
*NOTE: Cabling from the ESC-2 to the device being controlled is limited to 30-70 feet depending on baud rate and other factors.
- Provides two additional serial ports to an RTI control processor.
- Use multiple ESC-2 modules for virtually unlimited control of serial
- Capable of two-way serial communication.
- Integrates seamlessly into Integration Designer.
- Can be discovered and configured by Integration Designer over
- Easy wiring to devices using cat-5 cable - Includes two RJ-45 to
DB9 serial adapters.
|Serial (RS-232) Ports||Two, RJ45|
|Includes two RJ-45 to DB9 adapters|
|Ethernet Port||One, RJ-45|
|Mounting||Wall-mount or free standing|
|Dimensions (H x W x D)||W/tabs 2.8” (71mm) x 1.8” (45mm) x 1.0” (25mm)|
|Warranty||One Year (Parts & Labor)|
* All specifications subject to change without notice.